|
1. 壳体采用耐冲击、耐老化、阻燃、抗静电、强度高的SMC工程塑料模压成形或采用不锈钢板拉伸成形，外形美观、大方。
2. 灯罩采用聚碳酸酯注塑而成，透光性好，并能承受强撞击。
3. 外壳采用密封式结构，具有防水、防尘、防腐蚀等优点。
4. 内装电子镇流器和电感镇流器，及我公司独特的充砂型镇流器, 单脚荧光灯和双脚荧光灯可供用户随意选用。
5. 灯具具有开盖断电独具的电器联锁装置。
6. 照明应急两用灯。
7. 应急电源为免维护镍镉电池组，在正常供电条件下自动充电，事故断电或停电时应急灯自动转换为电池组供电，应急灯自动点亮。
8. 电缆布线。
9. 符合GB3836-2000、IEC60079、GB12476.1-2000、IEC62241标准要求 。 |
1. The case body adopts impact-resistance, aging resistance, fire inhibiting, antistatic and high strength SMC engineering plastic.
2. The lampshade is casted by polycarbonate, with high transpareny and impact withstanding ; umbrella;
3. The shell is sealed, with performances of water-proof dust-proof, corrosion-proof;
4. Inner fitted is electronical ballast and inductive ballast and own special sand-filled ballast. The single- or dual-foot fluorescent lamp is for choice.
5. The light has the interlock device that can cut power in case of capping.
6. Dual-fuction light of lighting and emergency
7. Emergency power is non-maintenance nickel-cadmium battery under the normal power-supplying condition, the emergent lamp will turn on when the power lose because of accident or power faiulre.
8. cable wiring;
9. Suitable for GB3836-2000、 IEC60079、GB12476.1-2000、IEC61241 standard request. |